Skip to content
Aerial view of a metal roof on a South Florida home

Miami-Dade & Broward homeowners

Metal Roof Replacement & Installation Guide

How to decide between repair and replacement, choose a metal roof system, and get from a quick estimate to a written scope you can trust.

Repair or replace? Start with an inspection.

A leak or a few lifted panels doesn't always mean you need a new roof. It also doesn't mean a patch will hold up. The honest answer comes from looking at the whole roof, not just the stain on the ceiling.

  • Repair usually makes sense when the damage is limited to one area and the rest of the roof and deck are sound.
  • Replacement is worth pricing when problems repeat in several places, the covering is near the end of its life, or the deck underneath is compromised.
  • Not sure? An inspection tells you which one you need before you spend money.
Request an inspection
Aerial view of a home with a brown metal roof, scaffolding and roofing materials on site

New installation vs. reroof

New installation

New construction or an addition with no existing roof covering. Because nothing is already on the deck, the work centers on the deck, underlayment, flashing and panel layout from the start.

Reroof (replacement or conversion)

Any home that already has a roof — including an asphalt shingle or tile roof being converted to metal. Whether the existing covering has to be torn off is decided by the inspection and stated in your written scope. The condition of the deck is only fully known once the old covering is removed, which is why your proposal explains how deck repairs are handled.

Choosing a system: standing seam or 5V crimp

Both are metal roof panel systems that Topmetal supplies and fabricates in Miami. They look different and go on differently. Here is how they compare.

Standing seam

Raised seams that lock panel to panel, with the fasteners hidden underneath. A clean, continuous look that suits many modern and traditional homes.

5V crimp

A classic Florida profile with five V-shaped ribs per panel and exposed fasteners. Often chosen for its traditional look.

From your address to a written scope

  1. Start with your address

    Enter your address in the instant quote. The tool measures the roof and asks a few questions about the project.

  2. See an estimated range

    You get a preliminary range (roof area × configured price per square, ±10%). It is a planning number, not a contract price.

  3. Schedule an inspection

    We look at the existing roof, the deck, flashing, penetrations and access, and confirm what the job really needs.

  4. Choose the system and color

    Compare standing seam and 5V crimp, then preview finishes in the roof color visualizer.

  5. Review the written scope

    Your written proposal lists the work, materials, installation scope and price. Read it, ask questions, then decide.

Get my instant roof quote

What affects the final installed price

Two roofs with the same square footage can price very differently. These are the things that move the number between the first estimate and the written proposal.

Tear-off and disposal
How many existing layers come off and what has to be hauled away.
Deck condition
Damaged or soft decking found at inspection or tear-off has to be repaired or replaced before new panels go on.
Underlayment and flashing
The underlayment system, plus flashing at walls, valleys, chimneys, skylights and other penetrations.
Roof complexity and access
Slope, height, number of hips and valleys, and how easily crews and material can reach the roof.
Panel system and finish
Standing seam or 5V crimp, the metal and gauge, and the finish you pick.
Permit and wind requirements
Applicable permit, inspection and wind-load requirements depend on the property and jurisdiction, and are confirmed for your specific job.

Materials-only quote vs. installed estimate

Materials-only quoteInstalled estimate
Who it's forContractors and owners who already have an installerHomeowners who want the roof installed
What it coversPanels, trims, flashing and accessoriesMaterials plus the installation scope in your proposal
How to startBrowse the catalogInstant roof quote

The instant quote is a preliminary range: your roof area times the configured price per roofing square, plus or minus 10%. It is subject to inspection. Your actual installation scope and price are confirmed in your written proposal.

Frequently Asked Questions

Roof replacement questions

Short answers for Miami-Dade and Broward homeowners. Anything specific to your roof is confirmed at inspection.

Is the instant quote my final price?

No. The instant quote multiplies your measured roof area by the configured price per roofing square and shows a range of about plus or minus 10%. It is a preliminary figure. The final price comes after an inspection, in a written proposal.

Does Topmetal install the roof itself?

Topmetal serves homeowners with roof installation and replacement and with installation coordination and support. Exactly who does what on your roof, and what is included, is set out in your written proposal before any work is scheduled.

Can I just buy the materials?

Yes. Topmetal supplies and fabricates metal roofing materials for contractors and homeowners. A materials-only quote covers panels, trims and accessories, not labor, tear-off or disposal, so it is not comparable to an installed estimate.

Should I choose standing seam or 5V crimp?

Both are metal roof panel systems available from Topmetal. Standing seam has concealed fasteners and raised seams; 5V crimp is a classic exposed-fastener profile. The right choice depends on your home, roof slope and budget. Ask us to compare them for your roof.

Where can I see product approvals?

Product approval documents (NOAs) are linked from our certifications page, which points to the official Miami-Dade records. Which approvals apply to your roof is confirmed in your proposal.

Which areas do you cover?

Homes across Miami-Dade and Broward counties. Our shop is at 6700 NW 37th Ct, Miami, FL 33147.

Ready for a number?

Start with an instant estimate, or talk to us at (305) 640-5290 or info@topmetalsupplier.com. Our shop is at 6700 NW 37th Ct, Miami, FL 33147.

Instant Roof Quote